jamessmith09

The printer not recognizing a cartridge is a very common issue faced by users. Printer cartridges need to be replaced whenever the level of ink is low or when the installed cartridges are faulty. Also, a lot of troubleshooting methods include the ink cartridge replacement as a potential solution. If you are facing an HP Printer Not Recognising Compatible Cartridges error and need insights about it, you are in the right place. This blog throws light on how to resolve a compatible cartridge error.

HP Printer Not Recognising Compatible Cartridges

Compatible cartridges can be defined as any cartridge that is authentic and manufactured by original manufacturers. At times even when you install an authentic cartridge, still, it wouldn’t be recognized by the printers.

Also Read:: Epson Printer Wont Print error

Reasons why HP printer cartridge error occurs:
Some reasons why this printer error happens is because:
When the internal memory isn’t restored.
The protective strips are taken out.
The chip is injured
HP cartridges protective sheet not removed
Ink cartridges installed in inaccurate slots.
HP printer troubleshooting Steps how to override HP printer cartridge error:
The primary reason why an authentic cartridge is deemed incompatible is due to a problem in resetting the internal memory. To reset the internal memory you can do as follows:
Pull out the new cartridges and place the old ones in their slot. Leave it there for 10 minutes.
Substitute the old cartridges with new ones. Doing till step shall resolve this error. If the issue exists, follow the next steps.
Detach the cartridges.
Switch off the printer.
Unplug the power cord from the outlet. Leave the printer in this state for ten minutes.
Connect the power cord to the outlet.
Lodge the cartridges in the correct slot.
Press the power button to switch on the printer.
The above-mentioned steps shall be beneficial to resolve how to override the hp printer cartridge error as well. Simply follow the above steps to replace the empty cartridges and in case of error, follow them.

If there is an issue that persists, do not hesitate to dial our HP printer helpline number. I hope this article helps!

You are in midst of an important printing operation and due to no apparent reason, the Epson won’t print. This scenario can be highly vexing. If you want to find a retort to this issue, you are in the right place. This article enlists 3 easy steps that could fix your issue.

Before starting with the steps, it is recommended to check for any error messages on the LCD screen of the printer. The error code could elucidate the reason behind the Epson printer not printing.

3 easy methods to resolve [b]Epson printer not printing correctly[/b]
Method 1: Ensuring there are firm connections
If you are using a wireless printer, verify that the printer is well connected to the Wi-Fi. Try disconnecting from the Wi-Fi and re-establishing the connection. Confirm whether the system and printer are connected to the same network; if not tether them to the same network. While using a printer that has USB ports, ensure that all the cables are operating adequately. Also cross-check whether the cords are established.

Method 2: Assign the printer as the default printer
At times the printer not printing issue could stem due to the Epson printer not being set as the default printer. To make it the default printer, press Start, followed by Settings, and click on Devices. Select Printers and Scanners. Choose the Epson printer > Manage > Set as default.

Method 3: Inspecting the ink cartridges
Press Start > Settings > Devices. Select Printers and scanners. Right-click on the current Epson printer you are using and choose Printing preferences. Navigate to the Maintenance tab and tap on Epson Status Monitor 3. In this window, you shall be prompted whether the cartridges need replacement.

The above 3 mentioned steps shall be beneficial to resolve this issue. However, if any step seems ambiguous or non-beneficial it is recommended to reach out to us on our Epson Printer Tech Support Number. Our delegates have experience in this field and can resolve your issues with ease.

Canon is a Japanese MNC manufacturing prime quality products related to the optical and imaging sector. Canon has lodged its name in the printing devices as one of the best printer brands. Every device due to some unexpected causes can encounter an issue. One prevalent error faced by Canon printer users is Canon Printer Not Printing Color. This blog provides 4 easy methods to fix this error code.

Why is the Canon Printer Not Printing?
Some primary radix why colors are not printed by the printer include:

Obsolete printer drivers
Ink levels in cartridges are low
Error in Canon printer setup
Incompatible ink cartridges
The faulty connection between the system and the printer
If you are confused what to do next, you are at the right place. This blog provides comprehensive Canon printer troubleshooting procedures to fix “Color not printed by Canon Printer” issue.

How To Fix Canon Printer Not Printing Color?
Method 1: Inspect the level of ink in the cartridges
Due to the low levels of ink in the color cartridges, the printer may not be printing the colors. To fix this problem, do as follows:

Open the printer and with caution remove the ink cartridges.
Scrutinize the level of ink in the cartridges.
If the ink quantity is low, replace the cartridges with new ones.
Set them again and try a demo print.

Method 2: Check the printing settings
At times, the color printing option is not enabled, because of which this issue might stem. To edit the color printing settings, do as follows:

Press Start > Settings
Visit “Printers and Scanners” and right-click on the printer you are using.
Select Properties. Confirm whether color printing is enabled. If not, enable it and save the changes.
Method 3: Printer driver update
Printer drivers formulate a link between the printer and the system, and hence, play an important role. To ensure the proper functioning of the driver, either update the driver or install the new drivers from the official website of Canon.

Method 4: Perform a power cycle
Try switching off your printer and dismantle all the cords of the printer. Switch it on and fasten all the cords. Give a print command to check whether the issue is resolved.

Dial [b]Canon Printer support Number to resolve all issues
[/b]The above-mentioned methods can resolve the issue, however, if the issue persists dial the Canon printer customer number. Our delegates shall guide you through and fix all your Canon printer issues.

Giving a print command from the PC to the printer is one of the most common ways to give print command. At times due to some glitch, the printer wouldn’t receive the command which as a result would delay the printing operations. This blog provides some easy and quick fixes to Brother printer not printing issue.

Why is my Brother printer not printing?

There a plethora of reasons why the Brother printer won’t print. Some prevalent reasons for this Brother printer problems are:

Paper jam
Hardware error
Obsolete printer drivers
Issue in cartridges
How To fix Brother printer not printing
Solution 1: Verifying whether there is an adequate Power supply
If there is a LED light glowing adjacent to the power supply option, it means the printer is receiving an active power supply.
If the LED light isn’t glowing, it could mean the printer isn’t receiving an adequate power supply.
However, if the printer is receiving an active power supply and still not printing, you might get an error prompt. The error code would further delineate whether the problem is with paper jam or ink cartridges.
Also Read::Canon mx922 error code c000
Solution 2: Confirm there is a connection between the printer and PC
Ensure there is a firm connection between the printer and the PC.
By opening the devices and printers in the Control Panel window on your PC, locate the Brother printer you are using.
Check its status. Try setting the printer as your default printer.
While making use of a wireless connection, ensure your printer is in the vicinity of the connection and receiving adequate network strength.
Solution 3: Ensure the printer drivers are up to date
Download the updated drivers either from the official Brother printer website.
You could also update it by visiting the drivers utility window in your system.
Solution 4: Cold Reset
Cold reset is the process by which the initial settings of the printer are restored. Before implementing it, it is suggested to make a back-up of the printer memory.
Resting the printer in its former state may resolve the issue.
The above-mentioned fixes are some quick and easy retorts to resolve the issue. In case your issue persists or you are stuck somewhere, it is advisable to seek our Brother Printer Support. You could receive expert advice from our team which works 24×7 to provide the best solutions to our customers.